60KW Electrical Oil Heater For Heat Conduction Oil Furnace

60kW Output Electric Mineral Insulated Heater for Heat Conduction Oil Furnace possesses characteristics of new type, safety, high efficiency and energy saving and low pressure (atmospheric pressure or low pressure). It can provide high temperature heat energy using heat conduction oil as heat carrier. By heat pump to make heat carrier circulation, the heat can be transferred to the heating equipment successfully.

 

Product name	Product model	Product specification
60kW Output Electric Mineral Insulated Heater for Heat Conduction Oil Furnace	MICH-HCOF-60KW	Output: 60 KW

 

60kW Output Electric Mineral Insulated Heater for Heat Conduction Oil Furnace

 

Properties:

 

1. The heat transfer performance of the heating element of this product is good, and the temperature difference between the heating core and the metal sheath is small. At the same time, according to the process requirements, the surface heat load density of the heating element of the MI heating cable can be accurately designed. Under the premise of ensuring the total heating power, the heated medium will not coke. It solves the shortcomings of the traditional tubular electric heaters for long-term carbon deposition, blasting, core breaking and short life. The heating element can with a copper or a stainless steel sheath according to the application temperature and location.

2. The outer shell of the electric heater is welded by seamless steel pipe and flange. The overall structure is tight and firm and the pressure sealing performance is good for safe use. The normal working pressure is 0.6MPa~6.4MPa.

3. The device connection and electrical connection meet the explosion-proof requirements with an explosion-proof grade d IIBT1—T6.

4. Two sets of temperature sensors are installed in electric heater to detect the temperature of the oil and the surface temperature of the heating element. At the same time, the flow locking device can be optionally selected according to the user's needs. When the medium does not flow, the electric heater automatically stops heating.

5. No daily maintenance is required and it is easy to be installed and convenient to be maintained.

6. The product is practical and adaptable. Various non-standard types of electric heaters can be designed according to the different uses and special requirements put forward by users.

Note: When designing an electric heater for using outdoors, the explosion-proof junction box should have a rainproof shed to prevent rainwater from impregnating the gap of the explosion-proof surface through the wet insulation material.

 

 

Technical parameters of 60kW Output Electric Mineral Insulated Heater for Heat Conduction Oil Furnace:

 

1. Heating medium: heat conduction oil;

2. Heating temperature: 0-350℃;

3. Power rate: 60KW;

4. Flow rate: 18m³/h;

5. Other available specifications as below with customization available as per to clients’ requirement.

 

Type no.	Voltage (V)	Heating load (kcal/h)	Power (KW)	Maximum Temperature ℃	Circulating pump flow (m3/h)	Pump Power (kW)	Inlet and outlet diameter
							Inlet	Outlet
MICH-HCOF--50	380	43000	50	320	8	1.5	DN32	DN32
MICH-HCOF--80	380	69000	80	320	10	2.2	DN40	DN40
MICH-HCOF--100	380	86000	100	320	12.5	3.0	DN50	DN50
MICH-HCOF-125	380	107500	125	320	20	4.0	DN50	DN50

 

60kW Output Electric Mineral Insulated Heater for Heat Conduction Oil Furnace

 

Overview and working principle:

 

1. 60kW Output Electric Mineral Insulated Heater for Heat Conduction Oil Furnace

60kW Output Electric Mineral Insulated Heater for Heat Conduction Oil Furnace possesses characteristics of new type, safety, high efficiency and energy saving and low pressure (atmospheric pressure or low pressure). It can provide high temperature heat energy using heat conduction oil as heat carrier. By heat pump to make heat carrier circulation, the heat can be transferred to the heating equipment successfully.

 

Heat conduction oil electric heating system consists of explosion-proof electric heater, organic heat carrier furnace, heat exchanger (if any), on-site explosion-proof operation box, heat oil pump, expansion tank, etc., combined into a skid block. It is only need to access the inlet and outlet media pipeline, power supply, and some electrical interfaces before using.

 

2. 60kW Output Electric Mineral Insulated Heater for Heat Conduction Oil Furnace working principle:

 

For 60kW Output Electric Mineral Insulated Heater for Heat Conduction Oil Furnace, heat is generated and transported by the electric heating element immersed into the heat conduction oil. Heat conduction oil, as medium circulated by circulating pump, is forced to liquid circulation and transfers heat to one or multiple heat using equipment. After unloading at the heating equipment, the heat oil returns to the electric heater through the circulating pump for absorbing heat then go back to heat use equipment. Around this circulation, the continuous transmission of heat is realized. The heated object temperature is increased while heating process requirement is reached.

 

Features:

 

Integrate electric heating installation, protection, process operation, maintenance, packaging, and transportation functions. Highly integrated design with small land required.

 

The core heating element of the heater is made of a new type mineral insulated heating cable. The heating cable possesses high application temperature, high mechanical strength, long service life and so on that are incomparable with conventional heating elements (electric heating pipes).

 

Pre-assembled in factory; small amount of on-site installation work; only the interface pipe and external electrical connection are needed to be completed, quick to put into use.

 

Easy to transport and transfer.